Product Overview
This Nikon FE2 chrome body is a 35mm film SLR camera with Auto, Manual and TTL flash modes and with built-in meter. In very good condition.
- Type of Camera: Electronically-controlled 35mm SLR
- Picture Format: 24mm x 36mm (standard 35mm format)
- Lens Mount: Nikon bayonet mount
- Lenses: AI-Nikkor and Nikon Series E lenses; Non-AI lenses cannot be mounted
- Shutter: Electronically-controlled, vertical-travel metal focal plane shutter with titanium curtains
- Shutter Release: Mechanical: on Auto/Manual; center-threaded shutter-release button accepts AR-3 Cable Release; button locked when film-advance lever is flush with camera body; Mechanical backup shutter release: M250 (1/250 sec.) and B
- Meter Switch: Pressing shutter-release button halfway down switches meter on; meter stays on for 16 seconds then automatically switches off; meter turned off when shutter speed dial is set at M250 or B
- Exposure Control: Aperture-priority automatic exposure control with shutter speed dial set on A; manual exposure control by turning shutter speed dial and/or lens aperture
- Shutter Speeds: On Auto: stepless speeds from 8 to 1/4000 sec.; on Manual: 16 quartz-timed speeds from 8 to 1/4000 sec., on Mechanical: M250 (1/250 sec.), B
- Film-Advance Lever: Single-stroke type with 30 deg. stand-off angle and 135 deg. winding angle
- Viewfinder: Fixed-eyelevel pentaprism type; 0.86X magnification with 50mm lens at infinity; 93% frame coverage
- Viewfinder Display: Shutter speed scale with meter needle and shutter speed/exposure mode indicator bar and over-/underexposure warning area; aperture-direct readout of set f/number; LED exposure compensation mark lights when dial is off "0" position
- Focusing Screen: Interchangeable matte Fresnel focusing screen with central split-image rangefinder spot and micro-prism collar (Nikon Type K2) as standard
- Refle Mirror: Automatic instant-return mirror
- Self-Timer: Quartz-timed 10-sec. delay; may be cancelled
- Exposure Memory Lock: Via self-timer lever
- Multiple Exposure Lever: Provided
- Accessory Shoe: Standard ISO type; hot shoe, ready-light, monitor and TTL control contacts provided
- Flash Synchronization: On Auto: 1/250 sec.; On Manual: 1/250 sec. or lower, or at 1/250 sec. only when shutter speed dial is set between 1/500 sec. and 1/4000 sec.
- PC Terminal: Provided; threaded
- Flash Ready-Light: LED visible at top of eyepiece; lights up when SB-16B, SB-15, SB-E or SB-10 Speedlight is charged; blinks to warn of underexposure during TTL operation
- Exposure Metering: Through-the-Iens center-weighted full-aperture-exposure measuring system using two silicon photo diodes
- Metering Range: EV 1 to EV 18 at ASA/ISO 100 with f1.4 lens
- TTL Flash Metering: Photo cell at base of mirror box measures flash exposures off the film plane during TTL operation with SB-15 or SB-16B
- Exposure Compensation: ±2EV in 1/3 increments
- Film Speed Range: ASA/ISO 12 to 4000
- Frame Counter: Additive type; automatically resets to "S" two frames before "0", when camera back is opened; on Auto, shutter speed is 1/250sec. until frame "1" is reached
- Power Source: Choice of one 3V lithium battery, two 1.55 V silver-oxide batteries or two 1.5V alkaline-manganese batteries; optional Anti-Cold Battery Holder DB-2 accepting two AA-type penlight batteries available
- Battery Check: By pressing shutter-release button halfway while looking through the viewfinder; if there is sufficient power, the black needle will move; if not, the black needle will remain at the bottom of the shutter-speed scale
- Depth-Of-Field Preview Lever: Provided
- Film Rewind: By crank provided
- Camera Back: Interchangeable with MF-12 or MF-16 Data Back; pops open when the film rewind-knob is pulled up as camera back lock is pushed counterclockwise; memo holder provided.
For more information, please call us at (03) 9670-0560.
